Continuous Flow Reel

$1,180.00$1,230.00

Please Note: This reel ships motor freight and requires a freight dock. No residential deliveries please.

This product ships free!

Clear
SKU: CFR47 Categories: ,

Continuous Flow Reel

Please Note: This reel ships motor freight and requires a freight dock. No residential deliveries please.

 

PART #

 

HOSE SIZE & CAPACITY

         ¾”                      1”                          1-1/2”

 

INLET

 

OUTLET

DF-CFR47-1-100150’125’1”1”
DF-CFR47-150-100250’150’100’1-1/2”1-1/2”
DF-CFR47-1-200400’300’150’1-1/2”1-1/2”
DF-CFR47-150-200200’1-1/2”1-1/2”
  • allows immediate and continuous flow of water at all times during deployment of hose
  • one-person operation
  • use with non-collapsible booster hose
  • powder coated with an electrostatically-applied, thermally-fused, red polyester finish steel drum
  • rims and universal mounting stand
  • female NPT inlet with Male NH/NST outlet

Safety notes

  • WARNING: This product contains a chemical known to the State of California to cause birth defects or other reproductive harm. Do not use in connection with drinking water. Wash hands after handling.

Description

Continuous Flow Reel

The Continuous Flow Reel is engineered to allow both immediate and continuous flow of water or applicable media at all times. Hose may be fully charged or pressurized during storage and deployment. Please Note: Only non-collapsible (rigid) hose may be used with a continuous flow reel.

This reel is designed for one-person operation and is ideal for close quarter scenarios. For marine type applications such as off-shore drilling platforms, barges and ships, using this reel, the operator can benefit from a fully charged hose and deploy the exact amount of hose length rather than having to unroll the entire length before charging with pressurized water. The same design concept applies to “brush trucks” used in fire fighting. This reel will allow the truck to be positioned in close proximity to the fire, such as a dumpster of small grass fire. Once again, the operator only needs to deploy enough hose length to complete the task.

This continuous flow fire hose reel can be floor, wall or truck mounted, depending on the application.

The frame of this reel is durably built from high gauge steel. It is then subjected to a powder coating process, which is electrostatically –applied, then thermally fused. The drum itself features a red colored, polyester finish.

The waterway inlet is a female NPT (tapered pipe) thread and the hose thread outlet is a standard NST (national Hose) thread. See thread guide.

Please note: A flexible connector assembly must be installed directly between the hose reel inlet hub and the water supply. Failure to use the flexible connector assembly shall void the warranty.

This continuous flow reel will accommodate hose diameters including; ¾”, 1” and 1-1/2”. The hose reel size required will depend on the diameter and the length of the hose for a particular application.

Safety notes

  • WARNING: This product contains a chemical known to the State of California to cause birth defects or other reproductive harm. Do not use in connection with drinking water. Wash hands after handling.

Reviews

There are no reviews yet.

Be the first to review “Continuous Flow Reel”

Your email address will not be published. Required fields are marked *

Additional information

Reel Size

1" X 100' Reel, 1" X 200' Reel, 1-1/2" X 100' Reel, 1-1/2" X 200' Reel