1-1/2″ MSHA Single Jacket Fire Hose (600 LB Test)

$183.00$406.00

“Special”- While supplies last!

This Product Ships Free!!!

Applications:

The 1-1/2″ MSHA Single Jacket Fire Hose (600 LB Test) is approved for use in underground mining operations. United States Department of Labor, Code of Federal Regulations acceptance number 18-FHA080002.
Title 30, Part 18, Section 18.65.

Pressure Ratings:

300# Service Test Pressure
900# Burst Pressure

Construction:

All Polyester outer jacket is woven to resist abrasion and mildew. Tube liner is a compounded rubber polymer, manufactured in accordance with MSHA requirements for flame resistance. Couplings are produced from extruded aluminum, designed to be light weight, non-sparking and hard coated for durability.

Temperature Range:

-40 degrees F to 180 degrees F

-40 degrees C to 82 degrees C

Special Characteristics

Engineered to prevent caustic emissions when exposed to fire. Made in the U.S.A. and accepted for use in underground coal mines.

Description

Aluminum Coupled MSHA Fire Hose | Rawhide Fire Hose

The MSHA Single Jacket Fire Hose (600 LB)  is approved for use in underground mining operations. United States Department of Labor, Code of Federal Regulations acceptance number 18-FHA080002.
Title 30, Part 18, Section 18.65.

Premium quality, abrasion resistant, heavy-duty fire hose manufactured per NFPA 1961 standards and

meets or exceeds all MSHA specifications. This hose is designed with self-extinguishing characteristics

and is engineered for prolonged storage and extended service. Resists heat, cold and abrasion.

Jacket Construction

A single jacket, woven evenly and free of defects, from spun polyester yarn that offers superior strength

and wear characteristics. The warp yarn is standard 100% polyester. The filler yarns are high strength,

low elongation, filament polyester to reduce weight and increase flexibility. In addition the jacket is

treated to resist mold and mildew.

Lining

The rubber lining is a single ply, extruded tube of synthetic polyurethane based material to resist ozone.

Under this specification, the MSHA approved material is vulcanized to the jacket to prevent delamination

or hydrolysis.

Couplings

Available with internal expansion ring threaded aluminum or brass. (NH/NST and NPSH/IPT standard)

Custom thread patterns available upon request.

Pressure Ratings

U.L. Hydrostatic Testing specifies a service test of 300 PSI, acceptance test of 600 PSI and a burst test

of 900 PSI in accordance with NFPA 1962 and UL-19 procedures.

Special Characteristics

Standard color is white. Other colors are available upon request. Standard lengths are 50’ and 100’.

Custom lengths are available upon request. Hose meets the standards of Underwriters Laboratories,

Inc. tm (UL) including UL-19 (tensile strength & elongation) for rubber-lined hoses.  All hoses are

stenciled with all NFPA approved markings and with letters, at least ¼” high stating “ Flame-resistant

USMSHA” followed by the manufacturers license / approval identifier number, permanently marked in a

contrasting color indelible ink.

Service Life

This hose has a potential service life of five (5) years, notwithstanding mistreatment and/or misuse.

Defective hose, couplings and configurations will be replaced at no charge, within one (1) year of

purchase.

[tcm id=”1″]

Reviews

There are no reviews yet.

Be the first to review “1-1/2″ MSHA Single Jacket Fire Hose (600 LB Test)”

Your email address will not be published. Required fields are marked *

Additional information

WeightN/A
Hose Color

White, Yellow

Hose Length Ft.

100, 50

Hose Couplings

Aluminum – IPT/NPSH (Rocker Lug- Expansion Ring), Aluminum – NST/NH (Rocker Lug – Expansion Ring), Brass – IPT/NPSH (Rocker Lug- Expansion Ring), Brass- NST/NH (Rocker Lug-Expansion Ring), UNCOUPLED

Hose Diameter

1.5"