Premium quality, light weight fire hose engineered to resist abrasion and chemicals. Ideally suited for Fire Brigades and Fire Departments. Designed to be layflat and flexible, while offering extended service life even after prolonged storage. Easy to handle in a broad range of temperatures.
300# Service Test Pressure
600# Proof Test Pressure
900# Burst Pressure
A heavy duty, ozone resistant, nitrile rubber tube and cover, with 100% synthetic yarn reinforcement. The “through-the-weave” extrusion process results in a one piece construction, therefore, this hose will not delaminate even when exposed to fuels, oil, and most low concentrated specific chemicals.
Internally Expanded 2-1/2″ Aluminum NST/NH Rocker Lug,
-30 degrees F to 122 degrees F /
-34 degrees C to 50 degrees C.
This hose features a wide rib pattern making it resistant to punctures, cuts and heat. Manufactured to meet or exceed NFPA specifications. All hose markings are per NFPA requirements. Stamped “Made in China”.
2-1/2″ Rubber Covered Fire Hose (600 LB Test) Coupled Aluminum NST “Special”
The rubber covered fire hose is manufactured to meet or exceed NFPA standard 1961, engineered to be durable and designed to remain flexible. Built to resist ozone, oxidation and most chemical / petroleum products. Made tough for extended service in rigorous use, yet virtually maintenance free.
The rubber covered fire hose is constructed from 100% synthetic yarn combined with nitrile rubber. Thru-the-weave manufacturing utilizes a circularly woven frame that is completely locked in with tough nitrile rubber to produce a single homogeneous unit. The laminated process consists of a 3-ply system, independently extruded and double vulcanized for maximum durability. The longitudinal ribbing reduces drag and provides for long service. The twill weave of the reinforcement resists puncture.
As required per specification(s), internal expansion ring threaded aluminum NH/NST.
The tensile strength is 1500 PSI or greater, ultimate elongation is 400% minimum and the smooth nitrile rubber yields durability while minimizing pressure drop. This hose remains flexible down to – 35 degrees F and will resist heat up to 1200 degrees F for two minutes without rupture or damage to the synthetic reinforcement.
Hose shall show no visible signs of cracking to the lining or cover when tested in accordance to ASTM D518 Procedure B (100pphm/118°F/70 hours).
Exposure to sea water and contamination by most chemical substances, hydro- carbons, oils, alkalis, acids and greases must have no effect on the short or long term performance of the hose.
The hose, when subjected to a static pressure of 100 PSI, shall be capable of with- standing a surface temperature of 1200°F for a minimum of one minute without rupture or damage to the synthetic reinforcement.
- 600# Acceptance Test Pressure
- 300# Working Pressure
- 900# Burst Pressure
– 4 degrees F to +212 degrees F
– 20 degrees C to + 100 degrees C
Manufactured to meet or exceed NFPA specifications. All hose markings are per NFPA requirements. Stamped “Made in China”.